Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 alpha 4/15/85; site mnetor.UUCP
Path: utzoo!mnetor!michael
From: michael@mnetor.UUCP (Michael Barnea)
Newsgroups: net.micro
Subject: Re: serial->parallel interface?
Message-ID: <3689@mnetor.UUCP>
Date: Tue, 2-Sep-86 16:21:55 EDT
Article-I.D.: mnetor.3689
Posted: Tue Sep  2 16:21:55 1986
Date-Received: Tue, 2-Sep-86 17:42:23 EDT
References: <394@tolerant.UUCP>
Distribution: net
Organization: Computer X (CANADA) Ltd., Toronto, Ontario, Canada
Lines: 20
Summary: UART Centronics interface


A UART and few gates should solve your problem.
Use a UART, which does not require a CPU for it's setup - such
as 6402 for example.
The receiver output is your parallel port; extra gates will provide
Centronics strobes.
-- 
Regards,



***************************************************************************

Michael Barnea,
UUCP: {allegra, linus, ihnp4, decvax}!utzoo!mnetor!michael
MAIL: Computer X Canada, Ltd.
      560 Denison st.
      Markham, Ont. L3R 2M8
      Canada
BELL: (416)-475-8980 ext. 308