Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!caip!cbmvax!amiga!andy
From: andy@amiga.UUCP (Andy Finkel)
Newsgroups: net.micro.amiga
Subject: Re: HELP! (LQ-800 printer drivers)
Message-ID: <1499@amiga.amiga.UUCP>
Date: Mon, 1-Sep-86 18:07:12 EDT
Article-I.D.: amiga.1499
Posted: Mon Sep  1 18:07:12 1986
Date-Received: Tue, 2-Sep-86 21:01:00 EDT
References: <6004@alice.uUCp>
Reply-To: andy@skipper.UUCP (andy finkel)
Organization: Commodore Business Machines, 1200 Wilson Drive, West Chester, PA 19380
Lines: 33

In article <6004@alice.uUCp> d@alice.UUCP (Daniel Rosenberg) writes:
>[ Second time around ]
>
>I bought myself an Epson LQ-800 printer (which, by the way, is quite
>a nice device.)
>
>Problem is, I'm getting extra linefeeds in both graphics and text,
>no matter what position the AUTO LF switch is on the LQ-800.
>
>The printer does linefeeds correctly with the PAR: device, but not
>the PRT: device, so I suppose it's the printer driver that's amiss.
>

Actually, the most likely problem is that:

1) that your cable is wired to keep auto-linefeed on always
   (an Epson feature, this overides the DIP switch).  Check your
   printer manual and undo that option.


			andy finkel
-- 

			andy finkel
			Commodore(Amiga)
			{ihnp4|seismo|allegra}!cbmvax!andy
		or	 pyramid!amiga!andy

Any expressed opinions are mine; but feel free to share.

I disclaim all responsibilities, all shapes, all sizes, all colors.

"Remember, no matter where you grow, there you are." - Buckaroo Bonsai.