Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!seismo!lll-crg!nike!ucbcad!ucbvax!hplabs!tektronix!tekcrl!tekgvs!keithe From: keithe@tekgvs.UUCP (Keith Ericson) Newsgroups: net.micro.amiga Subject: Re: Sasquatch Print Message-ID: <1726@tekgvs.UUCP> Date: Fri, 5-Sep-86 11:27:57 EDT Article-I.D.: tekgvs.1726 Posted: Fri Sep 5 11:27:57 1986 Date-Received: Sat, 6-Sep-86 20:40:22 EDT References: <225@plx.UUCP> <326@sivax.UUCP> <200@atux01.UUCP> <5162@decwrl.DEC.COM> Reply-To: keithe@tekgvs.UUCP (Keith Ericson) Distribution: net Organization: Tektronix, Inc., Beaverton, OR. Lines: 33 In article <5162@decwrl.DEC.COM> alverson@decwrl.UUCP (Robert Alverson) writes: > >First of all, let's not say a stackable expansion box is impossible. >But, simple solutions will have undesirable features. A ribbon cable >will probably increase crosstalk between signals on the bus as well >as increase the ringing noise on the signals. OK, folks. Here's my idea which you are free to have (as long as Tek doesn't come after you for it. But they don't know Amigas exist, anyway.) Instead of ribbon cable you use a high-quality, multilayer circuit-board designed with microstrip lines and shielding layers to interconnect the Amiga main box to your expansion system WHICH HAD BETTER SIT ON TOP OF THE AMIGA IF YOU'RE GONNA WANT ANYONE WITH A NORMAL SIZED DESK TO BUY IT!!! The pc-board/interconnect system would have to allow for some tolerance in the separation between the Amiga connector and the exp.box connector, but this has been done before - usually with one connecter that "floats" a little in it's mounting to the box. Getting the signals from hither to yon just ain't that hard a problem, given that "yon" is only a few inches away! keith (I dropped an assembly-language class in college 'cause I'll never be doin' any of that computer stuff, anyway) ericson at Teklabs -- -- -- -- | | | | | | | | | | | | | | | | =========================))============================ =========================((============================ (Turn this --^ sideways and connect Amiga to ExpBox)