Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!lll-crg!nike!ucbcad!ucbvax!ulysses!jld
From: jld@ulysses.UUCP (Jeff David)
Newsgroups: net.micro.pc,net.micro.apple
Subject: Apple/IBM PC hookup
Message-ID: <1380@ulysses.UUCP>
Date: Fri, 5-Sep-86 13:22:54 EDT
Article-I.D.: ulysses.1380
Posted: Fri Sep  5 13:22:54 1986
Date-Received: Fri, 5-Sep-86 23:00:04 EDT
Distribution: net
Organization: AT&T Bell Laboratories, Murray Hill
Lines: 10
Xref: mnetor net.micro.pc:6405 net.micro.apple:1349

I have a Leading Edge Model D (IBM Compatible) and an old Apple II+ sitting
next to each other.  Each has a modem attached.  I would like to hook these
two together so that (at a minimum) I could move ASCII files between the
two.  It would also be nice if I could get one to act like a terminal off
the other (as host).  How do I go about doing this?  Do I have to use the
modems or can I use the serial interfaces?  I don't want to have to write
any assembler code.  Has anybody tried to do this?  Is there an easy solution?
Thanks in advance for any help.

						Jeff David