Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!lll-crg!nike!ucbcad!ucbvax!NCSC.ARPA!moore
From: moore@NCSC.ARPA (Moore)
Newsgroups: net.micro.atari16
Subject: Modem Info
Message-ID: <8608121246.AA00671@ncsc.ARPA>
Date: Tue, 12-Aug-86 08:46:25 EDT
Article-I.D.: ncsc.8608121246.AA00671
Posted: Tue Aug 12 08:46:25 1986
Date-Received: Wed, 13-Aug-86 19:16:32 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 35


This may/may not be the place for it, but I've got a modem problem I hope some-
one can help me with:

My friend has a Datec 212SB modem with the following pin-outs (shown connected
to the modem port of the ST):

ST             Datec
--             -----

GND ----------- GND
TXD ----------- RXD
RXD ----------- TXD
RTS ----------- CTS
CTS ----------- DTR
SIG ----------- SIG
DCD ----------- DCD
DTR ----------- DTR
RNG ----------- RNG

The ST apparently has no DSR, and the Datec has no RTS, hence the connection
above.  He gets no response with XMODEM (1200 baud, no parity).  Any help will
surely be appreciated.

I figure not too many people will be familiar with the Datec, so if you have a
suggestion, please write!  Don't assume "well, someone else will answer this
poor dumb slob."  I need all the help I can get!


Jim Moore
NCSC
Panama City, FL
(904) 235-5158 (voice & data)

(RS-232 STANDARD? WHAT *STANDARD*????)