Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!mcvax!unido!uklirb!wip014
From: wip014@uklirb.UUCP
Newsgroups: net.micro.atari16
Subject: Re: EasyDraw Output - (nf)
Message-ID: <14600001@uklirb.UUCP>
Date: Thu, 4-Sep-86 05:39:00 EDT
Article-I.D.: uklirb.14600001
Posted: Thu Sep  4 05:39:00 1986
Date-Received: Fri, 5-Sep-86 22:06:45 EDT
References: <1834726721@UMass.UUCP>
Lines: 19
Nf-ID: #R:UMass:1834726721:uklirb:14600001:000:843
Nf-From: uklirb!wip014    Sep  4 10:39:00 1986

/***** uklirb:net.micro.at16 / UMass!RNEWTON / 11:59 pm  Aug 28, 1986*/
Does anyone out there have, know of, or know how to create a replacement
for the FX80.sys file that will drive a C-Itoh Prowriter 8510?  I hate
to think of trashing a very good printer to use one piece of software.
Rick Newton
University of Massachusetts - Amherst
/* ---------- */

I'd like to have a driver for the C.Itoh 8510 as well. I know that Atari-Benelux
has released such a driver for their SMM800-printer (or whatever they call that
thing). But there are no directions included for adapting the driver to any
other printer. And I just don't feel like comparing the FX80.SYS against the
SMM800.SYS or even disassembling the two.

I hope that someone comes up with a solution, Michael.

Michael Doerr
Uni. Kaiserslautern (Germany)
...!seismo!unido!uklirb!wip014