Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!caip!clyde!watmath!sunybcs!leo
From: leo@sunybcs.UUCP (Leo Wilson)
Newsgroups: net.micro.atari16
Subject: Memory upgrade (groan and moan, another boo-bo)
Message-ID: <819@sunybcs.UUCP>
Date: Sat, 6-Sep-86 03:19:56 EDT
Article-I.D.: sunybcs.819
Posted: Sat Sep  6 03:19:56 1986
Date-Received: Sat, 6-Sep-86 20:36:08 EDT
Reply-To: leo@sunybcs.UUCP (Leo Wilson)
Organization: guest at SUNY/Buffalo Computer Science
Lines: 22


Well, I did the upgrade on my ST at work & tho it complains not it doesn't
seem to be there. Ok, the questions:

	1) Does the freeram.acc I pulled off of the net awhile back
	   actually know if I have > 512k?

	2) How do I use the memtest.prg I pulled off of the net? It
	   says it's running a 1M check, but gives no errors unless
	   forced by the mouse. Shouldn't it beef a little if there's
	   a problem WITHOUT moving the mouse? (This question could
	   be a little premature as I only let it run 3 or 4 minutes)

Help! I'd like to get this one flying before digging into mine. It's
kind of nice to have someone else's machine to practice on, but it
should work.

Thanks,	-Leo

BTW, I've managed to uudecode lots of stuff from the net w/out mishap.
Are you sure you're setting file type binary when transferring executables
with kermit?