Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!nbires!hao!hplabs!tektronix!uw-beaver!ubc-vision!molihp!robt
From: robt@molihp.UUCP (Robert L Thurlow)
Newsgroups: net.micro.atari16
Subject: Re: Uudecode problems
Message-ID: <192@molihp.UUCP>
Date: Mon, 8-Sep-86 14:55:12 EDT
Article-I.D.: molihp.192
Posted: Mon Sep  8 14:55:12 1986
Date-Received: Wed, 10-Sep-86 01:28:40 EDT
References: <517@elmgate.UUCP>
Reply-To: robt@molihp.UUCP (Robert L Thurlow)
Organization: Moli Energy, Vancouver, B.C., CANADA
Lines: 22

In article <517@elmgate.UUCP> jdg@elmgate.UUCP (Jeff Gortatowsky) writes:
>Has anyone else successful uudecode anything and had it run on the ST?

  I have had excellent luck with uuencoded stuff.  The only two problems
I remember were with a Forth interpreter (an early version of Bradley's
FORTHMACS) which came in four parts and never has worked, and the 'Piano'
package from Scott Huskey, which was simply broken (but the new copy he
sent me by mail works - thanks, Scott!).

  I capture the stuff and squirt it to my ST while still uuencoded,
downloading it as straight ASCII with FLASH!.  I then uudecode it on my
ST.  This even worked for Hack for the ST.

  Caveat: I haven't tried decoding the MicroEmacs 3.7 yet, and I didn't
get all of the Uniterm binary.  But other people have had success, so...
I'll send my source for ST uudecode to anyone ; drop me a note if you wish.
(Or maybe I should send uuencoded binaries? :-) :-) :-))

#   UUCP : ...!ubc_vision!molihp!robt		Robert Thurlow		#
#   My thoughts are my own, and are void where prohibited by law.	#
#   "There was something fishy about the butler.  I think he was a	#
#    Pisces, probably working for scale."	-Nick Danger, 3rd Eye	#