Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!cmcl2!lanl!unm-la!unmvax!wampler
From: wampler@unmvax.UUCP (Bruce Wampler)
Newsgroups: net.micro.atari16
Subject: Re: Analog RGB monitor
Message-ID: <387@unmvax.UUCP>
Date: Wed, 10-Sep-86 12:32:15 EDT
Article-I.D.: unmvax.387
Posted: Wed Sep 10 12:32:15 1986
Date-Received: Thu, 11-Sep-86 18:40:41 EDT
References: <20827@styx.UUCP>
Organization: Univ. of New Mexico, Albuquerque
Lines: 10


	I used a SONY monitor with mine, don't have the model
number right here, however.  That particular model had a switch
in the back for both TTL and analog levels.  Apparently you can
now get dealers to order the non-standard 13 pin connector, but
I had to cut the cable for my monochrome and add an adaptor plug.

I can now use the SONY on both my IBM and ST just by switching cables
and changing from TTL to analog.  No problems excpet no sound from
the ST.