Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!cbatt!ihnp4!inuxc!pur-ee!j.cc.purdue.edu!h.cc.purdue.edu!pur-phy!clayton
From: clayton@pur-phy.UUCP (Clayton P. Handleman)
Newsgroups: net.micro.atari16
Subject: Re: Cartridge port connector - query
Message-ID: <2058@pur-phy.UUCP>
Date: Thu, 11-Sep-86 21:32:35 EDT
Article-I.D.: pur-phy.2058
Posted: Thu Sep 11 21:32:35 1986
Date-Received: Sat, 13-Sep-86 04:23:36 EDT
References: <977@batcomputer.TN.CORNELL.EDU>
Organization: Purdue Univ. Physics Dept., IN
Lines: 16

> 
> Does anybody know of some plug available for the ST cartridge port?
> I am thinking of something like a board with the right fingers on an edge,
> expanded to a more standard width on the other edge, or even with an edge
> connector on the other edge.  I DON'T need any traces for PROMS.
> 

I couldn't find one either, it being some kind of non-standard.
I did however manage to kludge up an adapter to a .1" centers edge connector by sticking copper tape on an appropriatly trimmed piece of pc board using the 
cartridge artwork included with developers kit as a guide.  It's ugly but it
worked like a dream.
If your not in the hurry I was I suggest you draw up and etch your own.

                                           -clayton

"If it works, don't fix it"