Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!caip!princeton!allegra!ulysses!burl!clyde!watmath!csc
From: csc@watmath.UUCP (Jan Gray)
Newsgroups: net.micro.atari16
Subject: Re: Memory Upgrade Plea
Message-ID: <3141@watmath.UUCP>
Date: Sat, 13-Sep-86 09:48:11 EDT
Article-I.D.: watmath.3141
Posted: Sat Sep 13 09:48:11 1986
Date-Received: Sat, 13-Sep-86 23:43:09 EDT
References: <905@sunybcs.UUCP>
Reply-To: csc@watmath.UUCP (Jan Gray)
Distribution: world
Organization: U of Waterloo, Ontario
Lines: 5

In article <905@sunybcs.UUCP> leo@sunybcs.UUCP (Leo Wilson) writes:
>though it does still boot & recognize bank 0 .  A little added info: I
>used Hitachi HM50256 chips & wire wound 68k resistors. My board is a rev. B

I hope you meant 68 ohm resistors.  Otherwise, that is your problem.