Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!ut-sally!pyramid!amiga!cbmvax!grr
From: grr@cbmvax.cbm.UUCP (George Robbins)
Newsgroups: net.micro.cbm
Subject: Re: Error in RS-232 Schematic?
Message-ID: <727@cbmvax.cbmvax.cbm.UUCP>
Date: Thu, 11-Sep-86 20:01:49 EDT
Article-I.D.: cbmvax.727
Posted: Thu Sep 11 20:01:49 1986
Date-Received: Fri, 12-Sep-86 22:17:05 EDT
References: <1022@mhuxl.UUCP>
Reply-To: grr@cbmvax.UUCP (George Robbins)
Distribution: na
Organization: Commodore Technology, West Chester, PA
Lines: 17

In article <1022@mhuxl.UUCP> whb@mhuxl.UUCP (BECKER, WILLIAM H) writes:
>
>The schematic for a C64 RS-232 interface which was posted recently
>seems to have an error.  It refers to a pin "O" on the C64 user
>port, but the reference manual labels them "A" thru "N", with no 
>"O".   What pin should this be?  Are there other errors in this 
>schematic?

I would mention that the Commodore VIC 1011A RS232 Adapter works just fine
with the C64/128.  Retail prices vary, but I understand you can usually
pick one up for ~$15-30.  Recommended for those not much intersted in hacking
hardware...

-- 
George Robbins - now working with,	uucp: {ihnp4|seismo|caip}!cbmvax!grr
but no way officially representing	arpa: cbmvax!grr@seismo.css.GOV
Commodore, Engineering Department	fone: 215-431-9255 (only by moonlite)