Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!brl-adm!brl-smoke!smoke!crash!pnet01!pro-mercury!mwilson@NOSC.ARPA
From: mwilson@NOSC.ARPA
Newsgroups: net.micro.cpm
Subject: Re: P2DOS0 and the H/Z 89
Message-ID: <3366@brl-smoke.ARPA>
Date: Wed, 27-Aug-86 22:31:42 EDT
Article-I.D.: brl-smok.3366
Posted: Wed Aug 27 22:31:42 1986
Date-Received: Thu, 28-Aug-86 21:33:07 EDT
Sender: news@brl-smoke.ARPA
Lines: 9


     I have implemented P2DOS on an Ampro Little Board successfully. It's not
to difficult. If you're not using M80, then *don't* use LOAD.COM to make the
.COM file. Use MLOAD. LOAD will make a file that is much too big. Load
P2DOS.COM on top of your system image with DDT. In normal DRI CP/M 2.2, the
BDOS is at address 1180 in the system image. Hope this helps!

Marc Wilson
noscvax!crash!pnet01!pro-mercury!mwilson@nosc