Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!husc6!panda!genrad!decvax!decwrl!ucbvax!sdcsvax!net1!graifer
From: graifer@net1.UUCP
Newsgroups: net.micro.mac,net.wanted
Subject: Wanted: Computer Aided Design on a Mac
Message-ID: <275@net1.UCSD.EDU>
Date: Wed, 10-Sep-86 01:34:10 EDT
Article-I.D.: net1.275
Posted: Wed Sep 10 01:34:10 1986
Date-Received: Wed, 10-Sep-86 22:00:57 EDT
Organization: University of California, San Diego
Lines: 12
Keywords: CAD Mac
Xref: mnetor net.micro.mac:6943 net.wanted:3826

A friend who is considering purchasing a Mac+ (or some other computer :-( )
has asked me about software to do Mechanical Design.  I know there are packages
that will allow the drawing and manipulation of 3-D objects, but are there any
that will allow linked objects to be moved (ie, push the rod, and the lever it
is attached to rotates on it's pivot).  Even better, are there any that will do
stress analysis on the components of such a mechanical system?

Send me E-mail (even to suggest 3-D graphics only packages), and I will
summarize for the net.

Thanks much
Dan Graifer