Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!cbatt!ihnp4!ihlpf!em
From: em@ihlpf.UUCP (Moskowitz)
Newsgroups: net.micro.mac
Subject: Re: Assimilation MIDI problem
Message-ID: <719@ihlpf.UUCP>
Date: Fri, 12-Sep-86 11:00:53 EDT
Article-I.D.: ihlpf.719
Posted: Fri Sep 12 11:00:53 1986
Date-Received: Sat, 13-Sep-86 06:05:46 EDT
References: <6030004@acf2.UUCP>
Organization: AT&T Bell Laboratories
Lines: 20

> 
> I recently bought an Assimilation MIDI conductor and it does not
> seem to work with Macterminal or Versaterm. I plug the connector in the
> modem port, then the modem in the side, I didnt hook up the synth but
> why should that matter. Both programs hang whirring the disk with frozen
> cursor. They say in the book that If there is no power on the synth it will
> default to RS232. I dont think this thing works!. Any luck, Anybody?
> 
> {ihnp4|allegra}!cmcl2!acf2!gossc

I've had the same problem with the OPCODE Midi interface.  Attaching
it may set up the port in such a way as to invalidate RS-232.

Another problem is there is a bug in the old 64K ROMs such that mouse
tracking is a problem with the OPCODE Midi interface .... it may be
similar in Midi Conductor.  Opcode sent a fix for this.  This is not
a problem with the new ROMs

Ed Moskowitz
ihnp4!ihuxm!em