Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!ut-sally!husc6!panda!genrad!decvax!tektronix!tekgen!tekigm!tekigm2!timothym
From: timothym@tekigm2.UUCP (Timothy D Margeson)
Newsgroups: net.micro.pc
Subject: Re: Western Digital Controller -- HELP!
Message-ID: <982@tekigm2.UUCP>
Date: Tue, 16-Sep-86 23:23:14 EDT
Article-I.D.: tekigm2.982
Posted: Tue Sep 16 23:23:14 1986
Date-Received: Fri, 19-Sep-86 22:23:07 EDT
References: <7204@lanl.ARPA> <693@bnrmtv.UUCP>
Reply-To: timothym@tekigm2.UUCP (Timothy D Margeson)
Distribution: net
Organization: Tektronix, Inc., Beaverton, OR.
Lines: 19

In article <693@bnrmtv.UUCP> perkins@bnrmtv.UUCP (Henry Perkins) writes:
>> I have an IBM/XT with a 20 Meg Tulin and I want to add a 30 Meg Seagate
>> Full Height (ST4038). The controller that I am using is the Western
>> Digital Auto Configuring WX2.
>> 
>> Mike Mitchell
>
>I'm not sure you can use 2 drives of different sizes; you couldn't with
>previous versions of the WX2.
>
>I suggest giving Western Digital a call at (408) 356-6067.
>-- 
>{hplabs,amdahl,3comvax,okstate}!bnrmtv!perkins        --Henry Perkins

I beg to differ, but my WD 1002 WX2 can be set for one ten and one twenty meg
drive very easily, or any combination the four lookup tables hold for that
matter.

Just for the record........