Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!lll-crg!caip!princeton!allegra!ulysses!mhuxr!mhuxt!houxm!ihnp4!alberta!sask!peachey
From: peachey@sask.UUCP (Darwyn Peachey)
Newsgroups: net.micro.pc
Subject: Davong RAM Board: info request
Message-ID: <397@sask.UUCP>
Date: Wed, 13-Aug-86 17:09:36 EDT
Article-I.D.: sask.397
Posted: Wed Aug 13 17:09:36 1986
Date-Received: Fri, 15-Aug-86 20:13:53 EDT
Distribution: net
Organization: University of Saskatchewan, CANADA
Lines: 21


	I have a Davong Systems 256K bytes memory board (Part No.
	11-000004 Rev. C) with 64K bytes installed.  The board is
	in an IBM PC 1 with 64K mother board.  The PC has double
	disk drives and an AST Combo+ with 192K.

	I would like to install an additional 64K bytes on the AST
	board and an additional 192K on the Davong board.

	My problem is that I don't have any documentation for the
	Davong memory board.  Can anyone provide me with the switch
	block settings for the Davong board?  Please send mail
	to

		{ihnp4,alberta,utcsri}!sask!peachey


	Thanks for any help you can give.

					Judy Peachey
					(306) 966-4015