Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!princeton!allegra!ulysses!bellcore!whuxcc!lcuxlm!whuxl!houxm!ihnp4!inuxc!pur-ee!uiucdcs!uiucuxc!clio!berger
From: berger@clio.Uiuc.ARPA
Newsgroups: net.micro.pc
Subject: Re: unix to pc com via modem
Message-ID: <9200017@clio>
Date: Fri, 15-Aug-86 13:24:00 EDT
Article-I.D.: clio.9200017
Posted: Fri Aug 15 13:24:00 1986
Date-Received: Sun, 17-Aug-86 09:25:47 EDT
References: <1048@soma.UUCP>
Lines: 6
Nf-ID: #R:soma.UUCP:1048:clio:9200017:000:288
Nf-From: clio.Uiuc.ARPA!berger    Aug 15 12:24:00 1986


If you have kermit 2.28 or later, I believe you can use it
successfully in ctty mode with the PC.  The only drawback
is if you run a program on the PC that isn't well-behaved
(ie: writes directly to screen memory), or that hangs and
requires a system reset, which you can't do remotely.