Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!cmcl2!husc6!uwvax!caip!clyde!burl!ulysses!allegra!alice!d
From: d@alice.UucP (Daniel Rosenberg)
Newsgroups: net.micro,net.micro.pc
Subject: Help with LQ-800?
Message-ID: <6013@alice.uUCp>
Date: Mon, 1-Sep-86 23:06:16 EDT
Article-I.D.: alice.6013
Posted: Mon Sep  1 23:06:16 1986
Date-Received: Tue, 2-Sep-86 07:03:25 EDT
Reply-To: d@alice.UUCP (Daniel Rosenberg)
Organization: Utility Muffin Research Kitchen
Lines: 19
Xref: mnetor net.micro:5965 net.micro.pc:6358

Help!

This is a request to anyone out there who has an Epson LQ-800.

The Problem:
	Using HEX MODE as a sort of debugging tool, it appears that
when sent a carriage return then line feed, the printer double spaces,
regardless of the setting of the linefeed-after-CR switch (SW2-8.)

	IF YOU HAVE AN LQ-800, could you perhaps check this out and
see what happens? If you can help me at all, it would be greatly, greatly
appreciated!

MUCH thanks,
-- 
# Daniel Rosenberg  (CE)   @   AT&T Bell Labs, Murray Hill 
# disclaimer: These opinions are necessarily mine, not my employer's.     
# UUCP: { (ihnp4) || research || allegra}!alice!d  AT&T: 201/582-6455 (work)
# "We're not in the eighth dimension! We're over New Jersey!" - BB