Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!caip!clyde!burl!ulysses!mhuxr!mhuxt!houxm!ihnp4!inuxc!pur-ee!uiucdcs!convex!trsvax!uhclem
From: uhclem@trsvax.UUCP
Newsgroups: net.micro.trs-80
Subject: Re: net.micro.trs-80
Message-ID: <70700065@trsvax>
Date: Wed, 27-Aug-86 10:29:00 EDT
Article-I.D.: trsvax.70700065
Posted: Wed Aug 27 10:29:00 1986
Date-Received: Sat, 30-Aug-86 21:31:38 EDT
References: <4004@reed.UUCP>
Lines: 27
Nf-ID: #R:reed.UUCP:4004:trsvax:70700065:000:889
Nf-From: trsvax.UUCP!uhclem    Aug 27 09:29:00 1986


[Take this line and eat it.]
It looks like your "unassembler" ate all the commas in code.  You listed:
	ld  c28
	ld  a28
	ld  a13  etc...
Since "13" is a carriage return and "28" is a cursor home code (among other
things) in Model 4 mode, I suspect your code should read:
	ld  c,28
	ld  a,28
	ld  a,13  etc...

Hope that helps out.

<This information is provided by an individual and is not nor should be
 construed  as  being  provided  by  Radio  Shack or Tandy Corp.  Radio
 Shack/Tandy Corp has no obligation to support the information provided
 in  any way.  Besides, the Model 4 is not IBM compatible and therefore
 it must not really exist.  Oops, been reading our press releases again.>
						

"Will the dancing Hitlers please wait in the wings!  We are only seeing
 singing Hitlers!" - The Producers  :-)

						"Thank you, Uh Clem."
						Frank Durda IV
						@ <trsvax!uhclem>