Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!decvax!ucbvax!ucbcad!nike!lll-crg!seismo!vrdxhq!ms3!msitd02
From: msitd02@ms3.UUCP (Larry Johnson, ISN-HIOS Prog. Dir.)
Newsgroups: net.unix-wizards
Subject: DEC RA60 Partition Sizes on 4.1BSD
Message-ID: <413@ms3.UUCP>
Date: Mon, 11-Aug-86 11:22:49 EDT
Article-I.D.: ms3.413
Posted: Mon Aug 11 11:22:49 1986
Date-Received: Tue, 12-Aug-86 09:14:02 EDT
Distribution: na
Organization: ISN - HIOS, Arlington, Va
Lines: 19
Keywords: RA60, 4.1BSD, Device Drivers


We have inherited a DEC VAX 11/780 with (among others) a DEC RA60
removable pack disk drive.  I have looked at the UDA device driver
(which we also use for the RA81), but cannot determin what the size
of the last partition (/dev/ra1h) should be for the /etc/mkfs "size"
parameter.  The driver specifies "-1", which the comments say means
"to the end of the disk".  

We need to run 4.1BSD on this system.  Unfortunately, I can't seem
to find anything in the manual pages or the setup documentation
which gives the partition sizes for the RA60.  

Does anyone out there have this info?  Please E-mail responses.
Thanks in advance for any assistance.
-- 
Larry Johnson	...!seismo!vrdxhq!ms3!lgj
ISN Corporation
1235 Jefferson Davis Hwy, Suite 605A
Arlington, VA 22202