Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!brl-adm!brl-smoke!smoke!iglesias@ICS.UCI.EDU
From: iglesias@ICS.UCI.EDU (Mike Iglesias)
Newsgroups: net.unix-wizards
Subject: getty speed switching under Ultrix v1.2
Message-ID: <2996@brl-smoke.ARPA>
Date: Wed, 13-Aug-86 14:14:07 EDT
Article-I.D.: brl-smok.2996
Posted: Wed Aug 13 14:14:07 1986
Date-Received: Thu, 14-Aug-86 15:16:31 EDT
Sender: news@brl-smoke.ARPA
Lines: 16

I've set up /etc/gettytab on our Microvax II running Ultrix v1.2 to
switch line speeds on breaks.  However, it doesn't seem to be very
reliable.  It appears that Ultrix is seeing one break as several, so
it skips past the correct speed about half the time.  Repeatedly
banging on the break key will get the correct speed sometimes, usually
after going past it 3 or 4 times, which can get frustrating.  Does
anybody have any ideas on what can be done to fix it?  Is it something
to do with the way the DHV-11 sees breaks?


Thanks,

Mike Iglesias
University of California, Irvine
iglesias@ics.uci.edu
...ucbvax!ucivax!iglesias