Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!topaz!nike!oliveb!intelca!mipos3!mike
From: mike@mipos3.UUCP (Michael Bruck)
Newsgroups: net.unix-wizards,net.unix
Subject: Re: Modems on Ultrix, part 1 of 2 (how to do it -- long)
Message-ID: <161@mipos3.UUCP>
Date: Sat, 16-Aug-86 03:23:08 EDT
Article-I.D.: mipos3.161
Posted: Sat Aug 16 03:23:08 1986
Date-Received: Sun, 17-Aug-86 10:35:50 EDT
References: <282@cirl.UUCP>
Reply-To: mike@mipos3.UUCP (Michael Bruck)
Distribution: net
Organization: Intel, Santa Clara, CA
Lines: 16
Xref: watmath net.unix-wizards:19244 net.unix:8915

In article <282@cirl.UUCP> das@cirl.UUCP (Dave Steffens) writes:
>
>DISCLAIMER: The following was my experience with Ultrix 1.1 and may NOT be
>wholly applicable to Ultrix 1.2 with which I have NO direct experience.
>
>Ultrix as supplied does NOT support modem control on ANY terminal lines.
>In order to enable modem control you **must** do a sysgen.

Not any more.  Ultrix 1.2 is much better than 1.1 in that respect.  I
remember having to rebuild the kernel every time a tty driver needed
to have a bit changed.  It's now a lot simpler since modem information 
can now be put in the /etc/ttys file.

	--Michael Bruck
	  Intel CAD, Santa Clara, CA
	  {decwrl,hplabs,amdcad}!intelca!mipos3!mike