Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!watmath!clyde!cbatt!cbosgd!ihnp4!alberta!ubc-vision!uw-beaver!cornell!batcomputer!hurf From: hurf@batcomputer.TN.CORNELL.EDU (Hurf Sheldon) Newsgroups: net.unix-wizards Subject: Re: getty speed switching under Ultrix v1.2 Message-ID: <892@batcomputer.TN.CORNELL.EDU> Date: Fri, 15-Aug-86 14:09:51 EDT Article-I.D.: batcompu.892 Posted: Fri Aug 15 14:09:51 1986 Date-Received: Mon, 18-Aug-86 01:15:44 EDT References: <2996@brl-smoke.ARPA> Reply-To: hurf@batcomputer.UUCP (Hurf Sheldon) Organization: Theory Center, Cornell University, Ithaca NY Lines: 13 We have been using 'S1200' in /etc/ttys with no problems- or break will make them work - reading /etc/gettytab this round robins the 'std' settings(causing a slight delay) & the list seemingly could be expanded to all the pertinent speeds. We go 1200 - 2400 - 300 and all the speeds select fine - it does seem on occaision that if 'getty' has handed over to 'login' & a break is issued things get weird. Hurf Sheldon Arpa.css: Hurf@ionvax.tn.cornell.edu Lab of Plasma Studies 369 Upson Hall phone: 607 255 7267 Cornell University Ithaca, N.Y. 14853