Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!cbatt!ihnp4!houxm!ho3cad!ekb
From: ekb@ho3cad.UUCP (#ERIC K. BUSTAD )
Newsgroups: net.mail
Subject: help with pathalias needed
Message-ID: <477@ho3cad.UUCP>
Date: Sun, 28-Sep-86 14:53:32 EDT
Article-I.D.: ho3cad.477
Posted: Sun Sep 28 14:53:32 1986
Date-Received: Tue, 30-Sep-86 07:51:27 EDT
Organization: AT&T Bell Laboratories, Holmdel
Lines: 35

I am having trouble getting the pathalias program to work on our machine.
Our machine, ho3cad, is an AT&T 3B20S running System V Release 2.  I am
using the version of pathalias that was in volume 3 of mod.sources. This
is marked as version "8.1 (down!honey) 86/01/19".  I compiled this without
making any changes to the source.  "config.h" looked fine for our machine,
so even that is unchanged.

I'd appreciate hearing from anyone who might have an idea as to what's
going on.

All that I get when I run pathalias is:

--------------------
You can't get there from here:
	
ho3cad	%s
--------------------

I get this both when using the UUCP maps from mod.map and when using my own
test input.

Here is an example of the test input I've used:

--------------------
ho3cad	ho2cad, ho7cad, ho8cad

ho7cad	ho3cad, ho2cad
ho8cad	ho3cad
--------------------

= Eric Bustad
  AT&T Bell Laboratories
  Holmdel NJ 07733-1988
  (201)949-6257
  ekb@ho3cad.ATT.COM or ihnp4!ho3cad!ekb