Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!cbatt!ihnp4!tellab5!dpd
From: dpd@tellab5.UUCP (Dan Dietrich)
Newsgroups: net.micro,net.micro.cpm
Subject: Intertec Compustar  -  (HELP !!)
Message-ID: <83@tellab5.UUCP>
Date: Tue, 30-Sep-86 00:00:38 EDT
Article-I.D.: tellab5.83
Posted: Tue Sep 30 00:00:38 1986
Date-Received: Thu, 2-Oct-86 21:34:13 EDT
Reply-To: dpd@tellab3.UUCP (Dan Dietrich)
Organization: Tellabs, Inc., Lisle, IL
Lines: 24
Xref: watmath net.micro:15686 net.micro.cpm:5995



I recently purchased and *old* Intertec "Smart Terminal" / CP/M
computer.  I bought the system "as is" at a hamfest
and I got no documentation or software with it.

The system is a Compustar Model 30 Video Processing Unit.  From the
information that I could find, this unit is an intelligent terminal
that has a Z80 processor and 64K of RAM.  This particular unit has
two 5 1/4 inch disk drives.

When the system is powered up, it simply says "Insert Diskette and hit RETURN".
Does anybody know where I might be able to find a copy of a boot disk
for this system ? Also, some technical information about the system such as
schematics, BIOS source, I/O ports and data formats and information about
cursor positioning would be quite useful too.

I would greatly appreciate any help that could be offered.



				Thanks in advance.

				Dan Dietrich