Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!seismo!columbia!caip!cbmvax!higgin From: higgin@cbmvax.cbm.UUCP (Paul Higginbottom) Newsgroups: net.micro.amiga Subject: Re: 1.2 problems Message-ID: <779@cbmvax.cbmvax.cbm.UUCP> Date: Thu, 25-Sep-86 01:14:43 EDT Article-I.D.: cbmvax.779 Posted: Thu Sep 25 01:14:43 1986 Date-Received: Fri, 26-Sep-86 03:13:16 EDT References: <440@sask.UUCP> Reply-To: higgin@cbmvax.UUCP (Paul Higginbottom) Distribution: net Organization: Commodore Technology, West Chester, PA Lines: 31 In article <440@sask.UUCP> hardie@sask.UUCP (Peter Hardie ) writes: > > One of the problems that occurred in 1.1 (which I reported via the net >to commodore) is still in 1.2. I have a hayes modem and I use one of the >many terminal emulators that were posted to the net. When I log off the >remote machine it drops carrier on the phone line and usually nothing >happens at this end. However, occassionally the act of dropping carrier >causes the amiga to crash. This also occassionally happens if someone >picks up the extension phone while I am online. Presumably there is a >wee hole in the handling of interrupts from the serial port. > I have never had this occur to me, and I use the VT100 program off here, and my own tiny terminal program (<4K) which doesn't use the serial device I might add, but neither ever have any problems, and I too have a Hayes. > Another problem that a friend has discovered is that the manx C compiler >does not call the assembler anymore. Has anyone got a fix for this? > >Pete >ihnp4!sask!hardie Your friend will have to wait for an updated C compiler from Manx, as the incompatability is their fault due to the kludgy fexec() routine which cc uses to call the assembler. This is fixed in a forwards and backwards compatible way in Aztec3.3. Sorry to bring the bad news. Word has it that the updates will be delivered "late fall" whatever that means. Hope this helps, Paul Higginbottom. Disclaimer: I do not work for Commodore or Manx, and my opinions are my own.