Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!lll-crg!lll-lcc!unisoft!dual!ptsfa!qantel!ihnp4!cbatt!cbdkc1!dugan
From: dugan@cbdkc1.UUCP (Dave R. Beck CB 3S313W X3847 WSB)
Newsgroups: net.micro.atari16
Subject: 1st Word NLQ on Star SG-10
Message-ID: <1585@cbdkc1.UUCP>
Date: Wed, 24-Sep-86 08:37:24 EDT
Article-I.D.: cbdkc1.1585
Posted: Wed Sep 24 08:37:24 1986
Date-Received: Thu, 25-Sep-86 07:49:48 EDT
Reply-To: dugan@cbdkc1.UUCP (Dave R. Beck CB 3S313W X3847 WSB)
Organization: AT&T Bell Laboratories, Columbus
Lines: 18

About four weeks ago I "accidentally" bought an ST.  A local store
had a grand opening of their second location, and they had 20
Mono/SS systems at $399.  No way could I pass that up!  Even at this
ridiculously low price, it took all my spare cash and then some, so
I'm stuck with PD and the bundled software.  Now to the point, 1st
Word seems to be a reasonable low level word processor, but I've got
a problem with it talking to my SG-10.  I re-worked the driver,
installed it, moved it to root and almost everything works.
What doesn't work is the NLQ select at print time, no matter what I select 
when it asks me, I always get draft quality.  I can't find anything 
in the driver that allows me to set the NLQ escape sequence by itself,
it works ok when I switch to NLQ in the document, but that's not
what I'm looking for.
I suspect this has already been covered, but I wasn't really paying
attention.  I hadn't really planned on buying an ST yet, but it
couldn't be helped :-)  If anyone knows of a fix, I and about six
others in our local ST user group will be very happy to know what it
is.