Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!think!nike!ucbcad!ucbvax!AMES-NAS.ARPA!fouts
From: fouts@AMES-NAS.ARPA
Newsgroups: net.micro.atari16
Subject: Magic Sac continued
Message-ID: <8610012003.AA11273@ames-nas.ARPA>
Date: Wed, 1-Oct-86 16:03:43 EDT
Article-I.D.: ames-nas.8610012003.AA11273
Posted: Wed Oct  1 16:03:43 1986
Date-Received: Fri, 3-Oct-86 11:41:32 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 26


     This weekend I was able to drag a 'real' MacIntosh home and hook it up
to my Atari.  Although I was able to transfer a lot of data between the
machines using Kermit, I was unable to successfully use the Magic Sac
'transmit' program to move data between the machines.

     The typical result was that both sides would start up correctly, the
Macintosh side would reach the 'Waiting for the ST' prompt, and the Atari
side would count backwards 987654321 and never get to the 0.  This would
always happened on the first transfer, except for once when I managed to
transfer an entire diskette, which however turned out to be unusable.

     Current status:
     
     1) transmit program doesn't work with either Macintosh or Lisa
     2) known bug in kernel prevents telecommunications programs from working
     3) bug in Apple code prevents single drive systems from doing
        disk to disk copies.

     I haven't tried to call Data Pacific again, and I haven't received an
updated diskette from them, nor have I heard anything at all back from Alex
Leavens about new copies of the diskettes I bought from him.

     I would appreciate hearing from ANYONE who has had success with the
transmit program; it's still posssible that my problem was with a bad copy
of the utility.