Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!elbereth!rutgers!sri-spam!nike!lll-crg!lll-lcc!styx!twg-ap!amdahl!pyramid!ucat!pesnta!amd!amdcad!cae780!leadsv!trimble
From: trimble@leadsv.UUCP (Gary Trimble)
Newsgroups: net.micro.atari16
Subject: Re: Beckemeyer SCSI board
Message-ID: <1125@leadsv.UUCP>
Date: Wed, 1-Oct-86 10:10:26 EDT
Article-I.D.: leadsv.1125
Posted: Wed Oct  1 10:10:26 1986
Date-Received: Sat, 4-Oct-86 05:49:13 EDT
References: <10@fornax.uucp>
Distribution: net
Organization: LMSC-LEADS, Sunnyvale, Ca.
Lines: 36
Summary: Here's the address..

In article <10@fornax.uucp>, chapman@fornax.uucp (John Chapman) writes:
> .
> 
> According to postings earlier this summer Beckemeyer Dev. was to have
> released their SCSI interface and clock board in mid August.  Does anyone
> know if they have done so? oe btter yet, has anyone actually got one and
> have anything to say about it?
> 
Beckemeyer (actually Berkeley Microsystems) released their SCSI/clock
board during the recent Atari expos at San Jose and back east. Some
details:

	It costs $135 for the card or $250 with an adaptec controller.
	(mounting brackets available for $8)

	They have an integrated 34.4 Mbyte drive (all up) for $1200.

The card does not support full SCSI. It will only address one device on
the bus and not deselect for the full "daisy-chaining" effects of SCSI.

Their address...Berkeley Microsystems
		1107 El Centro Avenue
		Oakland, CA 94602

		(415) 530-3436

I have no affiliation etc......

Gary M. Trimble
Lockheed Advanced Marine Systems


-- 

UUCP: {(ucbvax!dual!sun) (ihnp4!qubix)}!sunncal!leadsv!trimble
      {{allegra ihnp4 dual}!fortune!decvax!decwrl}!amdcad!cae780!leadsv!trimble