Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!columbia!caip!atux01!uxrd1!thk
From: thk@uxrd1.UUCP (Tom Kiermaier )
Newsgroups: net.micro.att,net.unix
Subject: Communication Ports
Message-ID: <119@uxrd1.UUCP>
Date: Fri, 19-Sep-86 09:03:21 EDT
Article-I.D.: uxrd1.119
Posted: Fri Sep 19 09:03:21 1986
Date-Received: Tue, 23-Sep-86 03:49:35 EDT
Organization: AT&T Communications, Piscataway NJ
Lines: 11
Xref: mnetor net.micro.att:1487 net.unix:5585

HELP!!! I have recently installed the Unix OS on my ATT 6300 PLUS and I
can't figure out how to use my hayes modem card with uucp or cu. When
running MS-DOS with the modem defined as COM2 everything works fine. The
office menu hardware setup procedure only uses the serial port for a modem.
There doesn't seem to be any way to tell UN*X to use something other than
the serial port.

			Thanks,
			Tom Kiermaier
			AT&T Communications
			(201)457-2271