Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!columbia!rutgers!caip!clyde!cbatt!cbuxc!cblpe!gmv
From: gmv@cblpe.UUCP (Mike Vrbanac)
Newsgroups: net.micro.att
Subject: 6300: NEC V30 mutually excludes AT&T 2meg memory expansion
Message-ID: <233@cblpe.UUCP>
Date: Fri, 10-Oct-86 15:41:04 EDT
Article-I.D.: cblpe.233
Posted: Fri Oct 10 15:41:04 1986
Date-Received: Sat, 11-Oct-86 21:36:17 EDT
Distribution: net
Organization: AT&T Bell Laboratories - Columbus
Lines: 13

I run a NEC V30 cpu chip in an AT&T PC6300 and have discovered that the
AT&T 2meg Enhanced Memory Expansion Board will not work with this cpu.
Stick the 8086 back in and all is well.  Symptoms: after MS-DOS boot messages
you get the 1st two lines of the "aemm.sys" device driver message
and then it hangs.   Any insight into resolving this conflict between
my two favorite throughput-enhancers would be greatly appreciated!
-- 

 +--------------+------------------------+-----------------+
 | Mike Vrbanac | AT&T Bell Laboratories | Columbus, Ahiya |
 +--------------+------------------+-----------------------+
 | Unix: {cbosgd|ihnp4}!cblpe!gmv  |  CompuServ: 76054,113 |
 +---------------------------------+-----------------------+