Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!gatech!cuae2!ihnp4!ihlpf!spear
From: spear@ihlpf.UUCP (Spearman)
Newsgroups: net.micro.att
Subject: Re: unix pc 7300, extneded ram problems, help please! - correction
Message-ID: <799@ihlpf.UUCP>
Date: Wed, 15-Oct-86 09:14:49 EDT
Article-I.D.: ihlpf.799
Posted: Wed Oct 15 09:14:49 1986
Date-Received: Wed, 15-Oct-86 21:59:07 EDT
References: <1396@ihlpl.UUCP> <750@mtune.UUCP> <2134@mtuxo.UUCP> <751@mtune.UUCP>
Organization: AT&T Bell Labs, Naperville, IL
Lines: 13

> You cannot mix combo card memory and memory expansion card memory and
> have the system see all of it. Unless you can put memory expansion
> cards in slot n and the combo card in slot m and fiddle it somehow
> (but I don't think so). There. Now somebody else can correct me.
Well, Jonathon, since you ask.. :-)
I have both a combo card populated with 1 meg and a 512K ram board
running in addition to my 512 on board, for a total of 2 meg.  The
problem with the original posting, I think, is that there is no
configuration of possible slots, etc. which allow more than 2 meg
of memory if you have only 512K on board.  At least I could not
find anything in the installation guide which would provide this.

Steve Spearman  ihnp4!ihop3!spear