Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!columbia!rutgers!caip!clyde!cuae2!ihnp4!ihuxy!bamford
From: bamford@ihuxy.UUCP (Bamford)
Newsgroups: net.micro.att
Subject: Re: unix pc 7300, extneded ram problems, help please!
Message-ID: <1618@ihuxy.UUCP>
Date: Wed, 15-Oct-86 14:41:22 EDT
Article-I.D.: ihuxy.1618
Posted: Wed Oct 15 14:41:22 1986
Date-Received: Thu, 16-Oct-86 05:50:10 EDT
References: <1396@ihlpl.UUCP> <750@mtune.UUCP>
Distribution: net
Organization: AT&T Bell Labs, Naperville, IL
Lines: 18

> To the best of my knowledge, and contrary to what the manual says, you can
> only put one memory expansion card on a unix pc and have the system see it.
> -- 
> Jonathan Clark

I have a pc7300 with 1/2 Meg motherboard.  When I ordered it, I asked for
1 meg, so they sent me an additional 1/2 meg card.  This works fine.  
Later, I got a combo RAM/EIA board, with another 1/2 meg.  I installed this
and the system DOES see 1 1/2 meg total.  Perhaps there is something
strange about the combo board as compared to a regular RAM board...

On the other hand, perhaps there is some upper limit on the amount of RAM
on expansion boards.

-- 
				Harold Bamford
				AT&T Bell Labs
				IE 2F-524 (312) 369-7397