Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!brl-adm!brl-smoke!smoke!clements@bbnccq.ARPA
From: clements@bbnccq.ARPA (Bob Clements)
Newsgroups: net.micro.cpm
Subject: IBM PC and 8\" CP/M
Message-ID: <4280@brl-smoke.ARPA>
Date: Wed, 1-Oct-86 13:59:33 EDT
Article-I.D.: brl-smok.4280
Posted: Wed Oct  1 13:59:33 1986
Date-Received: Sat, 4-Oct-86 10:37:48 EDT
Sender: news@brl-smoke.ARPA
Lines: 26

Help!  I have almost all the pieces but I'm not quite there.

I'm trying to get my IBM PC to read and write 8" CP/M format
disks.  Hence this posting to both cpm and ibmpc lists.

I have just gotten an 8" disk controller (from Floppy Disk Services,
Inc., a pretty good disk hardware supplier) made by Maynard.
They sold me a device driver by Flagstaff Engineering which makes
the 8" drives appear as DOS formatted devices and which allows
low level access to the drives.  I have Media Master, which goes
between DOS and CP/M file formats, but only on 5" drives. They
say they are not planning to support 8" formats.

So I need the program that knows CP/M formats and runs on the PC.
FDSI has one for sale, at the LUDICROUS price of $595.00!
Does anyone know of something at a reasonable price?  Or has
anyone got some low level disk accessing code that I could
use to write my own?

Thanks,
/Rcc

Bob Clements - clements@bbn.com - {ihnp4,decvax,linus}!bbnccv!clements
K1BC @ K1BC 145.09 and 221.11 MHz, Boston area

[Everything above is the trademark of somebody.]