Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!columbia!rutgers!caip!brl-adm!brl-smoke!smoke!wcwells%opal.Berkeley.EDU@ucb-vax.ARPA
From: wcwells%opal.Berkeley.EDU@ucb-vax.ARPA (William C. Wells)
Newsgroups: net.micro.cpm
Subject: Re:  IBM PC and 8\" CP/M
Message-ID: <4345@brl-smoke.ARPA>
Date: Fri, 3-Oct-86 14:58:28 EDT
Article-I.D.: brl-smok.4345
Posted: Fri Oct  3 14:58:28 1986
Date-Received: Mon, 6-Oct-86 18:32:35 EDT
Sender: news@brl-smoke.ARPA
Lines: 25

In reply to:

	Date: Wed, 1 Oct 86 13:10:24 EDT
	From: Bob Clements <clements@CCQ.BBN.COM>
	Subject: IBM PC and 8" CP/M
	To: info-ibmpc@usc-isib.arpa, info-cpm@amsaa.arpa
	Cc: clements@CCQ.BBN.COM
	
	Help!  I have almost all the pieces but I'm not quite there.
	
	I'm trying to get my IBM PC to read and write 8" CP/M format
	disks.  Hence this posting to both cpm and ibmpc lists.
	
	...

The most versitile program I have seen is "Xenocopy PC" from
Fred Cisim at Xenosoft, 1454 Sixth St, Berkeley, CA 94710,
Phone (415) 525-3113. This product supports 5 1/4 (40 & 80 track),
8in, and 3 1/2in drives if you have the appropriate hardware.

I do not know if can handle your controller or not. But it
might be worth a phone call to find out.  Program price is
under a hundred dollars.

Bill Wells