Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!hao!bill
From: bill@hao.UUCP (Bill Roberts)
Newsgroups: net.micro.mac
Subject: Question on VersaTerm2.01
Message-ID: <259@hao.UUCP>
Date: Thu, 16-Oct-86 09:27:54 EDT
Article-I.D.: hao.259
Posted: Thu Oct 16 09:27:54 1986
Date-Received: Thu, 16-Oct-86 22:37:20 EDT
Organization: High Altitude Obs./NCAR, Boulder CO
Lines: 21
Keywords: file xfer, macput

I recently upgraded to a Mac+ and have VersaTerm2.01.  VersaTerm used to work
fine for doing file transfers but I can't seem to get it to work now.  I use 
Mac Xmodem protocol and macput but I don't get the thermometer dialog or 
anything.  The little send/receive light on my modem doesn't appear did be doing
much either.  All I get, after about 30 seconds or so, is an alert box saying 
that the file transfer was unsuccessful.  The settings are:

	Xon/Xoff set
	No parity
	8 bit character size
	1.0 stop bits

Is there something special one has to do to use VersaTerm2.01 with the Mac+ in
order to tranfer files with macput?  This is very frustrating and any help would
be greatly appreciated.  Thanks in advance.


								Bill Roberts
								NCAR/HAO
								Boulder, CO
								!hao!bill