Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!seismo!ut-sally!pyramid!ranhome!randy From: randy@ranhome.UUCP (Randy Horton) Newsgroups: net.micro.pc Subject: Re: CGA with Composite output Message-ID: <199@ranhome.UUCP> Date: Tue, 23-Sep-86 03:47:29 EDT Article-I.D.: ranhome.199 Posted: Tue Sep 23 03:47:29 1986 Date-Received: Tue, 23-Sep-86 22:21:04 EDT References: <197@ranhome.UUCP> <10800011@mcomp> <253@butler.UUCP> Reply-To: randy@ranhome.UUCP (Randy Horton) Organization: AT Home in Palo Alto CA Lines: 49 In article <253@butler.UUCP> olivier@butler.UUCP (Charles Olivier) writes: >> >> > I would like to find out if there is a CGA type display adaptor which puts out >> > a COLOR composite video signal in addition to the standard rgb. Any >> > information would be appreciated. >> >> There is the ZUCKERBOARD color graphics adapter which comes with RGB and a >> parallel printer board, and also includes a RGB-to-Composite converter which >> plugs into the RGB 9-pin socket and has a RCA-type socket at the other end. >> Mine cost ca. $80 a month ago. > >Black Box Corporation sells a RGB to Composite converter with plugs into >the RGB 9-pin socket and has a standerd RCA phono jack output. >The sell a powered version (GC-AC034B) for $59.95 and a non-powered version >(GC-AC040B) for $39.98. > Unfortunately, the black box converter works in shades of grey. I have been unable to locate a source for the Zuckerboard, as of yet. PS: Thanks to all who have replied so far. I have recieved a number of suggestions, but so far, I have not resolved my problem. I may just save up, get an RGB monitor, and sell the composite. > Black Box Corporation > P.O. Box 12800 > Pittsburgh, PA 15241 > (415) 746-5530 >------------------------------------------------------------------------------- >-- > > > Charles Olivier > > E-Mail ...uw-beaver!tikal!dataio!butler!olivier -- (Randy Horton) allegra| hplabs | topaz |-!pyramid!ranhome!randy decwrl |