Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!lll-crg!topaz!ll-xn!mit-amt!mit-eddie!genrad!decvax!tektronix!reed!psu-cs!psueea!waldref
From: waldref@psueea.UUCP (Greg Waldref)
Newsgroups: net.micro.pc
Subject: Re: Need pinouts for IBM PC[AT] serial/parallel
Message-ID: <258@psueea.UUCP>
Date: Tue, 23-Sep-86 02:21:32 EDT
Article-I.D.: psueea.258
Posted: Tue Sep 23 02:21:32 1986
Date-Received: Wed, 24-Sep-86 05:19:10 EDT
References: <511@bucsb.bu.edu.UUCP>
Reply-To: waldref@psueea.UUCP (Greg Waldref)
Organization: Dept. of Electrical Engineering, Portland State University; Portland OR
Lines: 21

Here are the pin-outs for the serial (db-9) connector and how they should
be connected for use with a modem.  I can't find the pin-out for parallel
(its' here some place!). If you don't get it send me mail and I'll find 
the info.
 
	db-9	name	db-25
	1	cd	8
	2	td	3
	3	rd	2
	4	dtr	20
	5	sg	7
	6	dsr	6
	7	rts	4
	8	cts	5
	9	ri	22

Yes, 2 and 3 do get reverced for a non-nul modem cable.  I hope I got
all the numbers right (they do match what I have).
 
greg
...tektronx!psu-cs!psueea!waldref