Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!seismo!gatech!gt-eedsp!owen
From: owen@gt-eedsp.UUCP (Owen Adair)
Newsgroups: net.micro.pc
Subject: Re: NEC V20 How to How to USE?
Message-ID: <166@gt-eedsp.UUCP>
Date: Mon, 29-Sep-86 09:44:05 EDT
Article-I.D.: gt-eedsp.166
Posted: Mon Sep 29 09:44:05 1986
Date-Received: Wed, 1-Oct-86 02:28:47 EDT
References: <1500065@iuvax> <6200047@inmet> <1091@kontron.UUCP>
Reply-To: owen@gt-eedsp.UUCP (Owen Adair)
Organization: School of Electrical Engineering, Ga. Tech, Atlanta, GA  30332
Lines: 16

In article <1091@kontron.UUCP> cramer@kontron.UUCP (Clayton Cramer) writes:
>> When I installed a V20 in my PC, I found that DISKCOPY and FORMAT
>> didn't work any more.  Since it was an 8Mhz chip, I had increased
>
>DISKCOPY and FORMAT both require that the processor run at 4.77 MHz.

I am running an 8Mhz PC with the V20 and never had a problem running these
utilities or any other program.



-- 
Owen Adair, Digital Signal Processing Lab, Ga. Institute of Technology
uucp ... !{akgua,allegra,hplabs,ihnp4,seismo,ulysses}!gatech!gt-eedsp!owen
Disclaimer: My employer is not responsible for, nor does it care, what I 
	    say here or anywhere else.