Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!cmcl2!lanl!sam
From: sam@lanl.ARPA (Sam A Matthews)
Newsgroups: net.micro.pc,net.unix,net.unix-wizards
Subject: Microport System V/AT help request
Message-ID: <8114@lanl.ARPA>
Date: Wed, 1-Oct-86 11:39:14 EDT
Article-I.D.: lanl.8114
Posted: Wed Oct  1 11:39:14 1986
Date-Received: Fri, 3-Oct-86 00:26:07 EDT
Distribution: net
Organization: Los Alamos National Laboratory
Lines: 36
Xref: mnetor net.micro.pc:6791 net.unix:5730 net.unix-wizards:8075


	I'm having a problem with Microport's System V/AT running on a 
Kaypro 286i, maybe someone out there in netland can help me. First, my 
configuration:

	Kaypro 286i
	640k RAM
	30Mb HD
	1.2Mb Floppie (one)
	Everex EGA board
	NEC Multisync Monitor
	Sys V/AT "Complete system"

	I have 2 partitions, 10Mb DOS, 20Mb UNIX.

The problem: When I do a "soft boot" with Ctrl/Alt/Del, I get an error message
in the middle of the screen: "Unexpected SW Interrupt 06 at F000:0059  Type
(R)eboot, any other key to continue" The system hangs at this point requiring
a complete power down to fix. 

Microport's telephone support suggests that the problem is with Kaypro. However,
they also point out that they don't have a Kaypro and so cannot duplicate the
problem to be sure.

Has anybody out there tryed Sys V/AT on a Kaypro? Has anybody ever seen this 
message? Does it indicate a hardware problem or an incompatibility? 

Also, does anybody have a nroff/troff printer driver for an Ebson compatible
parallel printer?

Thanks in advance!

Sam Matthews			       /\|/\     "We put a star
sam@lanl.ARPA			     --> * <--      in a box."
(ihnp4 or cmcl2)!lanl!sam	       \/|\/
Opinions are my own and not necessarily those of your government.