Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!cmcl2!yale!husc6!think!nike!ucbcad!ucbvax!decvax!tektronix!uw-beaver!uw-june!entropy!fetrow
From: fetrow@entropy.UUCP
Newsgroups: net.micro.pc
Subject: Re: LaserWriter+ <--> IBM-PC
Message-ID: <382@entropy.UUCP>
Date: Fri, 10-Oct-86 21:24:48 EDT
Article-I.D.: entropy.382
Posted: Fri Oct 10 21:24:48 1986
Date-Received: Sat, 11-Oct-86 21:30:10 EDT
References: <544@water.UUCP> <591@bunny.UUCP>
Reply-To: fetrow@entropy.UUCP (David Fetrow)
Distribution: net
Organization: UW MathStat, Seattle
Lines: 23


 The IBM PC and the LaserWriter use different stop/start protocols.
The LaserWriter uses XON/XOFF and the PC uses something else. I've
used two solutions:

 1] A speciallized card (e.g. MacBridge) that lets the PC use the
    Appletalk connector. (Handy if you also have a MacIntosh)

 2] A serial printer buffer that can convert the protocols (e.g.
    MicroFazer).

 The ultimate solution is to buy a LaserJet+ :-)
-- 

    - Dave Fetrow

    "CP/M is nice because it has no more than 64K*8 errors per tick."
							 

  {ihnp4,tektronix}!uw-beaver!entropy!fetrow                  :UUCP
  fetrow%uw-entropy@ms.washington.beaver.edu                  :ARPA
  fetrow@UWALOCKE,7833117@UWAVM                               :BITNET
  74175,1724                                                  :Compuserve