Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!caip!clyde!cbatt!cbuxc!cbuxb!cbrma!karl
From: karl@cbrma.UUCP (Karl Kleinpaste)
Newsgroups: net.unix-wizards
Subject: Re: SysV on VAX 780
Message-ID: <5257@cbrma.UUCP>
Date: Thu, 9-Oct-86 12:08:04 EDT
Article-I.D.: cbrma.5257
Posted: Thu Oct  9 12:08:04 1986
Date-Received: Fri, 10-Oct-86 03:50:46 EDT
References: <1340@trwrb.UUCP>
Organization: AT&T-BL, RMAS, Columbus
Lines: 29
Keywords: System V, Vax 780, DZ11

In article <1340@trwrb.UUCP> moline@trwrb.UUCP (Dan Molinelli) writes:
>A friend is trying to bring up System V on a VAX 780. He doesn't
>have a KMC11 or a DMC11 - he only has DZ11s. (Autoconfig barfs when
>he trys to tell it to use a DZ11 for the tty drivers.) 
>
>Has anyone ever booted SysV on a 780 with a DZ11?

We run SysV.0 on both our 780s.  You need to make sure that your DZ11
has entries in /etc/master like this:

dz11	8	277	6	dz	8	0	1	8	5	tty
dzb	8	277	46	dzb	8	0	36	8	5	tty

And then, in our configuration, we have DZs specified in our
definitions file as

dzb	300	160100	5	8
dzb	310	160110	5	8
dzb	320	160120	5	8
dzb	330	160130	5	8
dz11	540	760200	5	8
dz11	550	760210	5	8
dzb	340	160140	5	8
dzb	350	160150	5	8

The above is simply by grep'ing for 'dz' in /etc/master and the defs
file on this system.
-- 
Karl Kleinpaste