Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!columbia!rutgers!caip!clyde!bellcore!whuxcc!lcuxlm!whuxl!houxm!hropus!jrw
From: jrw@hropus.UUCP (Jim Webb)
Newsgroups: net.unix-wizards
Subject: Re: SysV on VAX 780
Message-ID: <718@hropus.UUCP>
Date: Thu, 9-Oct-86 08:09:31 EDT
Article-I.D.: hropus.718
Posted: Thu Oct  9 08:09:31 1986
Date-Received: Fri, 10-Oct-86 05:15:20 EDT
References: <1340@trwrb.UUCP>
Distribution: na
Organization: Bell Labs, Holmdel, NJ
Lines: 13
Keywords: System V, Vax 780, DZ11

> A friend is trying to bring up System V on a VAX 780. He doesn't
> have a KMC11 or a DMC11 - he only has DZ11s. (Autoconfig barfs when
> he trys to tell it to use a DZ11 for the tty drivers.) 

Whose SV is he using?   I have currently brought ATT's SV up on over
30 vaxen (750,780,785,8600,8650) and have never seen "autoconfig" so
I don't know why it would barf, but I have had no problems using plain
dz11's when kmc's were scarce.

What error is this config program giving?  Are the vectors correct for
dz11's.  The must be named dz11's, not dzb's, if you do not have kmc assist.
-- 
Jim Webb             "Out of phase--get help"          ...!ihnp4!hropus!jrw