Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!mcvax!cernvax!ethz!ceb
From: ceb@ethz.UUCP (Charles Buckley)
Newsgroups: comp.emacs
Subject: GNU on Sun3s -- HELP
Message-ID: <404@ethz.UUCP>
Date: Mon, 10-Nov-86 11:16:58 EST
Article-I.D.: ethz.404
Posted: Mon Nov 10 11:16:58 1986
Date-Received: Mon, 10-Nov-86 21:37:43 EST
Organization: CS Department, ETH Zuerich, Switzerland
Lines: 35

A number of people seem to run into this problem, including me, so
I'll circulate a net response.  

The problem lies in bringing up GNU Emacs on Sun 3's.  People get
temacs to run, and get a dump of xemacs, which is absolutely
worthless, (won't run, can't be debugged, etc.)

When this happened to me, I solved it by using the right include file
in my makefile, it must be m-sun3.h (not m-sun.h).  Turns out the only
difference between m-sun3.h and m.sun2.h (yes, both of these exist) is
in the way undump is compiled; the header of the core image is
different for Sun 3's.  Hope this helps.

Charles Buckley				uucp: mcvax!ethz!ceb
					earn: BUCKLEY@CZHETH5A

Institut fuer Integrierte Systeme	
ETH-Zentrum
CH-8092 Zuerich (Suisse)
Tel: 01/256 5245 (national)
   +411 256 5245 (international)


-- 

Dr. Charles E. Buckley			uucp: mcvax!ethz!jungfrau!ceb
					earn: BUCKLEY@CZHETH5A

Institut fuer Integrierte Systeme	
ETH-Zentrum
CH-8092 Zuerich (Suisse)
Tel: 01/256 5245 (national)
   +411 256 5245 (international)