Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ucbvax.BERKELEY.EDU
Path: utzoo!decvax!ucbvax!RSCH.WISC.EDU!oden
From: oden@RSCH.WISC.EDU (Gregg Oden)
Newsgroups: mod.computers.laser-printers
Subject: Re: WordPerfect and the LaserWriter
Message-ID: <8609291836.AA07424@rsch.wisc.edu>
Date: Mon, 29-Sep-86 14:36:57 EDT
Article-I.D.: rsch.8609291836.AA07424
Posted: Mon Sep 29 14:36:57 1986
Date-Received: Fri, 3-Oct-86 07:46:06 EDT
References: <8609240330.AA12698@ucbvax.Berkeley.EDU>
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 16
Approved: laser-lovers@washington.arpa
Summary: we've seen this on all LW+'s (never on plain LW's)

In article <8609240330.AA12698@ucbvax.Berkeley.EDU>, RKIRCHNE%carleton.edu@RELAY.CS.NET writes:
> We have experienced the creep problem (described by David Buerger
> on a QMS PS-800) on our Apple LaserWriter, using it in SPECIAL Diablo
> 630 emulation mode with WordPerfect.  Each page is registered about
> 1/4 line off from the previous.  It is off by 2 full lines in 8 pages.
> 
> Is there some modification that should be made to the WP Diablo 630
> printer driver?
> 
> Roger Kirchner

we had this problem when we upgraded to the LaserWriter Plus.  It happened
with any program that used linefeeds (instead of form feeds) to go from
page to page.  Every Plus we found here at Wisc. had this problem.  We had
to un-upgrade to get rid of it.  (A shame.)