Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ucbvax.BERKELEY.EDU Path: utzoo!decvax!ucbvax!germany.CSNET!jochen From: jochen@germany.CSNET (Jochen Grobholz) Newsgroups: mod.computers.vax Subject: [M. Muehlhaeuser, Univ. Karlsr: RE: Setting Function keys on VT240] Message-ID: <8610030923.AA16833@ucbvax.Berkeley.EDU> Date: Thu, 2-Oct-86 12:37:05 EDT Article-I.D.: ucbvax.8610030923.AA16833 Posted: Thu Oct 2 12:37:05 1986 Date-Received: Fri, 3-Oct-86 09:13:51 EDT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The ARPA Internet Lines: 30 Approved: info-vax@sri-kl.arpa ----- Forwarded message # 1: Via: v750;Date: Thu, 2 Oct 86 09:53 MET From: "M. Muehlhaeuser, Univ. Karlsruhe, Telematics Group" <"3075::MUEHLHAEUSER"@V750.IRA> To: info-vax-request@germany.CSNET Subject: RE: Setting Function keys on VT240 X-VMS-To: V750::IN%"info-vax-request@germany.csnet" RE: Programming the function keys on a VT2xx -------------------------------------------- (requested by Ric Steinberger) a) change P0;0... to P1;1... b) if this is not sufficient, add f\ at the end of the escape-sequence (the 'f' can be replaced by any other character and should not be needed according to the manuals). c) note that the keys are available only when pressed together with Max Muehlhaeuser Telematics Group, University of Karlsruhe, W.Germany (germany) - 721-608-3391 ----- End of forwarded messages