Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!watmath!clyde!rutgers!nike!ucbcad!ucbvax!miduet.UUCP!steve From: steve@miduet.UUCP (Steve Lademann) Newsgroups: mod.computers.vax Subject: DELUA/DEUNA Message-ID: <19406.8610241320@miduet.gec-mi-at.co.uk> Date: Sat, 25-Oct-86 10:36:45 EST Article-I.D.: miduet.19406.8610241320 Posted: Sat Oct 25 10:36:45 1986 Date-Received: Sun, 26-Oct-86 01:44:50 EST Sender: daemon@ucbvax.BERKELEY.EDU Distribution: net Organization: The ARPA Internet Lines: 29 Approved: info-vax@sri-kl.arpa We have a VAX 11/750 running BSD4.2 (soon to be 4.3) which needs a change of Ethernet interface. We would like to put a DEUNA in there, but don't have the slots/amps at 5v to allow this. So we're thinking of putting a DELUA in instead. Anyone got any comments to make on the compatibility (or incompatibility) of DELUAs and DEUNAs? We intend to use Lou Salkind's driver - any mods required? Many Thanks in advance ----------------------------------------------------------------- |Steve Lademann |Phone: 44 727 59292 x326 | |Marconi Instruments Ltd|UUCP : ...mcvax!ukc!hrc63!miduet!steve | |St. Albans AL4 0JN |NRS : steve@uk.co.gec-mi-at | |Herts. UK | | ----------------------------------------------------------------- |"The views expressed herein do not necessarily reflect"| _____ | |"those of my employer, and may not even reflect my own"| ( ) | ----------------------------------------------------------------- --- ----------------------------------------------------------------- |Steve Lademann |Phone: 44 727 59292 x326 | |Marconi Instruments Ltd|UUCP : ...mcvax!ukc!hrc63!miduet!steve | |St. Albans AL4 0JN |NRS : steve@uk.co.gec-mi-at | |Herts. UK | | ----------------------------------------------------------------- |"The views expressed herein do not necessarily reflect"| _____ | |"those of my employer, and may not even reflect my own"| ( ) | -----------------------------------------------------------------