Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!cbatt!ihnp4!inuxc!pur-ee!uiucdcs!uiucuxc!clio!berger
From: berger@clio.Uiuc.ARPA
Newsgroups: net.cycle
Subject: Re: irratating oil leak
Message-ID: <11700007@clio>
Date: Mon, 20-Oct-86 17:28:00 EDT
Article-I.D.: clio.11700007
Posted: Mon Oct 20 17:28:00 1986
Date-Received: Wed, 22-Oct-86 05:09:23 EDT
References: <870@cuuxb.UUCP>
Lines: 4
Nf-ID: #R:cuuxb.UUCP:870:clio:11700007:000:194
Nf-From: clio.Uiuc.ARPA!berger    Oct 20 16:28:00 1986


Every one of those cylinder head screws has an o-ring, doesn't it?
Don't just look at the main cylinder head gasket.  Replace all the
o-rings on the screws.  One of them is probably distorted.