Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!rutgers!husc6!mit-eddie!mit-trillian!rlk
From: rlk@mit-trillian.MIT.EDU (Robert L Krawitz)
Newsgroups: net.emacs
Subject: Re: GNU 18.26: `No X'
Message-ID: <1306@mit-trillian.MIT.EDU>
Date: Mon, 20-Oct-86 16:02:01 EDT
Article-I.D.: mit-tril.1306
Posted: Mon Oct 20 16:02:01 1986
Date-Received: Tue, 21-Oct-86 23:47:07 EDT
Reply-To: rlk@athena.MIT.EDU
Distribution: world
Organization: MIT Project Athena
Lines: 9

I built it on our 785 and it ran correctly.  The "No X" error means
that XOpenDisplay failed inside the gnuemacs X driver, which either
means that your machine was not xhosted or that the DISPLAY variable
was wrong, although it sounds like the latter was not the case.

If you are still having this problem, could you please mail me the
exit status of the editor?  The exit status encodes the failure mode,
and it would be useful in helping me track the problem down.
-- 
Robert^Z